We offer the following services :-

​

a) Vibration measurement service for rotating machinery such as motors, pumps, fans, alternators, compressors to check if vibration level is in compliance to vibration limits or having high vibration due to mechanical faults.

 

b) Insitu balancing service for ID Fan, FD Fan, Blower and Cooling Tower. This service is offered only if the vibration fault is due to imbalance. If other faults are present they will need to be resolved first otherwise balancing cannot be performed.

 

c) Vibration analysis service to troubleshoot vibration problem. This is advanced service that is offered after vibration measurement service to check for issues such as resonance.
​
d) Floor vibration measurement service - we offer this service for checking the vibration levels of floors in plants for their production floors and cleanrooms. This service is for customers who want to assess the suitability of a location to install their sensitive instruments. Our floor vibration measurement service are also used by customers assessing if a building is suitable for rental (or purchase) for their production requirements.

 

Our use of low frequency accelerometers that are highly sensitive offers more accurate checking of floor vibration. We do not use geophones for our checking for floor vibration as at low frequencies below 10 Hz readings taken with a geophone will be severely attenuated. 

​

For example, an instrument supplier sold a piece of sensitive equipment to a metrology laboratory. The supplier required the laboratory to prepare the floor according to VC-C standard before the sensitive equipment is installed. If we had used a geophone for the measurement the prepared floor would have passed the vibration checking easily. The use of a low frequency accelerometer (in this case the Wilcoxon 793L) showed that the floor could not meet VC-C standard consistently. The ramification here is that if the sensitive equipment was installed on the floor without further rectification they can expect alarms to be triggered more often, resulting in calls to the supplier for warranty service.
​
e) Calibration of vibration meter, vibration analyzer, handheld vibration calibrator and vibration sensor that is traceable to NIST. We use a portable tabletop vibration shaker to ensure proper calibration check.

​

i) Brands of wired vibration sensors (single axis accelerometer and triaxial accelerometer) that we calibrate include CTC, Dytran, Emerson, FAG, Hansford, IMI, Kistler, MMF, Monitran, PCB, Pruftechnik, Rion, SKF, Wilcoxon

ii) Sample list of vibration meters and vibration analysers that we can calibrate :-

- Adash vibration meter (Model Vibrio III,Vibrio M), analyzer (Model VA5Pro, VA3Pro, VA4Pro) and signal analyzer box (SAB)

- Advantech Kawatetsu vibration meter (Model MK-10L-a)

- Balmac vibration meters (Model 211M, 211-SM-100, 200M, 205M, etc)

- Bently Nevada vibration meter (Model TK-81, Snapshot)

- Bruel & Kjaer (B&K) vibration analyzers (Model 2516)

- Castle vibration meter (Model GA2002, VEXO)

- Commtest vibration analyzers (Model vb5, vb6, vb7, vb8)

- CSI / Emerson vibration analyzers (Model 2115, 2117, 2120, 2130, etc)

- DJB vibration meter (Model VS1)

- Extech vibration meters (Model SDL800, VB500, 407860, etc)

- FAG vibration detector (Model Acida Detector 2, Detector 3)

- Fluke vibration meter (Model Fluke 805) and vibration tester (Model Fluke 810)

- Hansford HS-620 and HS-630 vibration meter

- KET (Model 201) vibration meter

- Lutron vibration meters (Model VB-8201HA, VB-8203, 8220, VB-8206SD, etc)

- Metrix vibration meter (Model 5500, 5550, Vibra-Check VM2800A, VM3800A)

- MMF vibration meter (Model VM12) 

- Machinemate Vibrometer (Model MK10)

- Monitran vibration monitors (Model VM110) and vibration meter (Model VM220)

- Pruftechnick (Model Vibescanner, Vibrotip)
- Rion vibration meters (Model VM-54, VM-61, VM-62, VM-63A, VM-80, VM-82, VM-6360, VA-12, etc)

- Sendig vibration meter (Model 908, S908, S909Z-6, S909Z-3, S908B, etc)

- Showa Sokki vibration meters (Model 1022A, 1332B Digi Vibro, 2304A, etc)

- SMART Sensor vibration meter (Model AR63A)

- SKF vibration meters (Model Microlog CMVA55, CMVP50, CMVL3600-IS, CMXA 51-IS, CMAS100-SL)

- TIME vibration pen and vibration testers (Model TV200, TV220, TV300, TV310, TV320, 7231, etc)

- Trig-Tek vibration meter (Model 61R)

- VABBIT (Vibration Assisted Brilliant Breakdown Intervention Tool)

- VMI Viber X1, Viber X2, Viber X3, Viber X5, X-Viber

- VMS vibration meter (Model Viber, Viber-A)

- Wilcoxon vibration meters (Model MAC200, MAC800)

- Wilson Wolpert vibration meters (Model WVG-110, WVG-120)

- Zone vibration meter (Model ZVG-100, ZVG-110, ZVG-120) 

 

iii) Handheld vibration calibrators such as :-

- Wilcoxon REF2510 ReferenceMate Portable Vibration Shaker

- PCB / IMI 699B02, 394C06 Hand Held Calibrator

- MMF VC-20 / VC-21 Vibration Calibrator

- DJB VC-01 Handheld Calibrator

- Kemo VTCal1 Handheld Accelerometer Calibrator